Related Manuals for Valcom V-DW11025B
Summary of Contents for Valcom V-DW11025B
- Page 1 Installation and Programming Manual V1.1 V-DW11025B / V-DW11040B Wireless Digital Clock +1 540-563-2000 P. Valcom, Inc. +1 540-362-9800 F. 5614 Hollins Road www.valcom.com Roanoke, VA 24019...
-
Page 2: Table Of Contents
+1 540-563-2000 P. Valcom, Inc. +1 540-362-9800 F. 5614 Hollins Road www.valcom.com Roanoke, VA 24019 V-DW11025B / V-DW11040B Wireless Digital Clock Table of Contents Table of Contents—2 Installation Included in the Kit—3 Surface (Wall) Mount Installation—4 Surface (Wall) Mount Installation (continued)—5 Double Mount Installation—6... -
Page 3: Included In The Kit
+1 540-563-2000 P. Valcom, Inc. +1 540-362-9800 F. 5614 Hollins Road www.valcom.com Roanoke, VA 24019 Included in the Kit Below is a list of all the items included in the installation kit. The items in the kit will correspond to the type of mounting and voltage option chosen. -
Page 4: Surface (Wall) Mount Installation-4
+1 540-563-2000 P. Valcom, Inc. +1 540-362-9800 F. 5614 Hollins Road www.valcom.com Roanoke, VA 24019 Surface (Wall) Mount Installation... -
Page 5: Surface (Wall) Mount Installation (Continued)-5
+1 540-563-2000 P. Valcom, Inc. +1 540-362-9800 F. 5614 Hollins Road www.valcom.com Roanoke, VA 24019 Surface (Wall) Mount Installation (continued) Mount Housing to Wall and/or Gang Box - To mount the housing to the wall, install two (2) wall anchors into the wall (not supplied in kit) and take two pan head screws no larger than #8 (also not supplied in kit) and drive them into the anchors leaving an 1/8th inch gap between the head of the screw and the wall. -
Page 6: Double Mount Installation-6
+1 540-563-2000 P. Valcom, Inc. +1 540-362-9800 F. 5614 Hollins Road www.valcom.com Roanoke, VA 24019 Double Mount Installation... -
Page 7: Double Mount Installation (Continued)-7
+1 540-563-2000 P. Valcom, Inc. +1 540-362-9800 F. 5614 Hollins Road www.valcom.com Roanoke, VA 24019 Double Mount Installation (continued) *For metal mounting bracket: Use a wall anchor that can support 50 lbs or more with a maximum screw size of #8 Screw both housings together - Using the two (2) self tapping, 6-19 x 7/16”... -
Page 8: Double Mount Installation (Continued)-8
+1 540-563-2000 P. Valcom, Inc. +1 540-362-9800 F. 5614 Hollins Road www.valcom.com Roanoke, VA 24019 Double Mount Installation (continued) Feed wiring through base and pole - Take the wiring coming from the switch box and begin to feed it through the center of the base of the mounting assembly until it emerges from the hole in the center of the clock housing. -
Page 9: Wiring Information
+1 540-563-2000 P. Valcom, Inc. +1 540-362-9800 F. 5614 Hollins Road www.valcom.com Roanoke, VA 24019 Wiring Information Wiring and Jumper Settings... -
Page 10: Frequently Asked Questions
How long does it take for the clock to receive a signal? Upon power up, the clock will look for the signal for 30 minutes. The Valcom Wireless Digital Clock will look for the signal every minute thereafter. -
Page 11: Troubleshooting
What happens if the clock does not receive the signal? Take the clock within close proximity to the transmitter and power the clock. If the clock does not correct, call Valcom technical support. I have a location with a marginal signal. What should I do?
Need help?
Do you have a question about the V-DW11025B and is the answer not in the manual?
Questions and answers