Table of Contents
Advertisement
Wall Mount Installation - V-AW12BLP / V-AW16BLP
INSTALL, POWER, AND SET YOUR MASTER CLOCK OR REPEATER BEFORE POWERING THE SECONDARY
WIRELESS CLOCKS
A Valcom Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If
the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize.
Included in Package
Description
V-AW12BLP/V-AW16BLP round
SlimLine analog clock
Included in Wiring Kit (A-SLM-MK-S-1)
PLEASE NOTE: A user will also have to provide a Phillips-head screwdriver, a small flat-blade screwdriver, a single gang box, any equipment needed to install
the gang box, and any additional wiring needed to extend the power or ground cables. You may also need a 1/4 inch drill if you decide not to attach the
clock directly to the gang box.
If any of the items listed in the wiring kit are missing, you may contact Valcom and order a
replacement kit.
VERY IMPORTANT:
Quantity
1
1
2
1
2
1
1
2
2
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
Picture
P. 540-563-2000
F. 540-362-9800
www.valcom.com
17
- Quick Links:
- V-Aw12B/V-Aw16B
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the V-AW12A and is the answer not in the manual?