Dionex Easion Operator's Manual
If the function to be performed is not available on the ePanel Set, click the
Command icon on the Instrument toolbar above the ePanel Set or press
the F8 key to open the Chromeleon Command window. From there, you
can access all commands available for the function.
Figure 2-10
Figure 2-10. Dionex Easion: Chromeleon ePanel Status and Control Functions
2.4.2
Software Control Modes
Two modes of software control are available: direct control and
programmed control.
•
•
24
shows ePanel features related to the Dionex Easion.
With direct control, you select operating parameters and commands
from the Chromeleon ePanel Set. Direct control commands are
executed as soon as they are entered. For more information, see
Section
3.11.2.
With programmed control, you create a list of control commands
(known as an instrument method) to be executed in chronological
order. Instrument methods can be created automatically (with the help
of a software wizard). For more information, see
Section
3.11.3.
Doc. 155028-01 08/20