Table of Contents
Advertisement
Dionex Easion Operator's Manual
Link LED
The
between the Dionex Easion and the PC on which
Chromeleon is installed.
LED Status
On
Flashing
Off
TTL and Relay Connector
The TTL and Relay connector strip provides two TTL outputs, two relay
outputs, and four TTL inputs. The outputs can be used to control
functions in other TTL- or relay-controllable devices. The inputs can be
used to actuate the injection valve, turn the pump on and off, and perform
an autozero command. For connection instructions, see
Fuse Holder, Power Switch, and Power Receptacle
•
•
•
The power supply cord is used as the main disconnect device. Make
sure the socket-outlet is located near the Dionex Easion and is easily
accessible.
Le cordon d'alimentation principal est utilisé comme dispositif
principal de débranchement. Veillez à ce que la prise de base soit
située/installée près du module et facilement accessible.
Das Netzkabel ist das wichtigste Mittel zur Stromunterbrechung.
Stellen Sie sicher, daß sich die Steckdose nahe am Gerät befindet und
leicht zugänglich ist.
14
Link
LED indicates the communication status
Description
Although the Dionex Easion and the PC are linked, no data is
currently being transmitted or received.
The Dionex Easion and the PC are linked and data is being
transmitted.
The Dionex Easion and the PC are not currently linked.
The fuse holder contains two fast-blow IEC 127 fuses rated 3.15 A
(P/N 954745). For instructions on how to change the fuses, see
Section
5.14.
The power switch provides on/off control of power to the Dionex
Easion.
The power cord plugs into the IEC 320 three-prong receptacle.
Link
Appendix
C.
Doc. 155028-01 08/20
Advertisement
Table of Contents
