Table of Contents
Advertisement
Dionex Easion Operator's Manual
3.11.3 Automated (Batch) Sample Processing
NOTE This section provides a brief overview of the steps
To process samples automatically, first add sample injections to a
Chromeleon sequence. (A sequence determines how a group of injections
will be analyzed and the order in which they will be run.) For each
injection, a sequence typically includes these elements:
•
•
•
•
There are two ways to create a sequence in Chromeleon:
•
•
After creating the sequence, you are ready to start automated sample
processing.
Summary of Automated Sample Processing
1. Complete the instructions in
2. If a Dionex AS-DV is installed: Prepare and fill sample vials and
40
required to perform sample analyses using Chromeleon.
For detailed instructions, refer to the Chromeleon Help.
An instrument method—A predefined list of commands and
parameters for controlling the system and acquiring sample data.
The chromatographic data acquired.
A processing method—A predefined set of instructions for evaluating
the data acquired.
Templates for displaying chromatographic data on the screen and for
printing reports.
eWorkflows provide predefined templates and rules for creating new
sequences. If they have been defined for your laboratory, eWorkflows
are the recommended method for creating a sequence.
The Sequence Wizard provides a series of dialog boxes that guide you
through the process of creating a sequence.
prepare the Dionex Easion for operation and to prepare the samples
for processing.
place them in the autosampler tray. Refer to the autosampler manual
for detailed instructions.
Section 3.2
through
Section 3.10
to
Doc. 155028-01 08/20
Advertisement
Table of Contents
