When Should I Remake Standards; When Should I Remake Eluents; How Do I Shut Off The System; How Do I Store Columns - Thermo Scientific Dionex Easion Operator's Manual

Dionex Easion Operator's Manual
D.4 When should I remake standards?
Standards are used for calibration and should always be made fresh. They have a
lifetime of one week.
D.5 When should I remake eluents?
•
Eluents should be remade every two or three weeks. After refilling the eluent
bottle, use the Eluent Fill Volume slider on the Chromeleon ePanel to reset
the volume of liquid in the bottle.
To ensure the accuracy of the Eluent Fill Volume display, reset the
volume each time the eluent bottle is filled.
•
When you refill the eluent bottle, always remake the regenerant and fill the
regenerant bottle.with fresh regenerant.
The regenerant bottle must remain filled all the way to the top at all
times.
D.6 How do I shut off the system?
Click the pump Off button on the Chromeleon ePanel (see
–or–
Turn off the power switch on the Dionex Easion rear panel (see
D.7 How do I store columns?
Columns should be stored in eluent. Refer to the column manual for complete
instructions.
D.8 How do I know when a column is dirty?
Refer to the troubleshooting section of the column manual.
100
Figure 2-10).
Figure 2-3).
Doc. 155028-01 08/20