Installing The Au-Odu; Table 2-1: Au-Odu Types - Nera WILINK I System Manual

Chapter 2 - Installation Guidelines
2.1

Installing the AU-ODU

The following sections describe how to install the AU-ODU, including pole
mounting the ODU and connecting the cables.
2.1.1 AU-ODU Installation Requirements
2.1.1.1 AU-ODU Packing List
ODU: Any of the following:
Item
WILINK I-BST-AU-ODU-3.3d
WILINK I-BST-AU-ODU-3.3e
WILINK I-BST-AU-ODU-3.3f
WILINK I-BST-AU-ODU-3.3g
WILINK I-BST-AU-ODU-3.5a
WILINK I-BST-AU-ODU-3.5b
WILINK I-BST-AU-ODU-3.6a
WILINK I-BST-AU-ODU-3.6b
Pole mounting kit
2.1.1.2 Additional Installation Requirements
The following items are also required to install the ODU:
IF cable with two TNC connectors* (see Section
types and length).
Antenna* and RF cable* for connecting the antenna to the AU-ODU.
Grounding cable with an appropriate termination.
Installation tools and materials, including appropriate means (e.g. a 1" to 4"
pole) for installing the AU-ODU (and antenna).
24

Table 2-1: AU-ODU Types

Description
AU-ODU operating in the 3.3d band
AU-ODU operating in the 3.3e band
AU-ODU operating in the 3.3f band
AU-ODU operating in the 3.3g band
AU-ODU operating in the 3.5a band
AU-ODU operating in the 3.5b band
AU-ODU operating in the 3.6a band
AU-ODU operating in the 3.6b band
WILINK I MODULAR BASE STATION SYSTEM MANUAL
2.1.3 for details on IF cable