Nera WILINK I System Manual page 80

Status of all traps to the default Enabled status. The Admin Status menu
includes the following options:
Show Disabled Traps List: Displays all traps with Admin Status Disabled
(the default Admin Status for all traps is Enabled).
Update: Enables modifying the Admin Status of a selected trap.
Restore Defaults: Enables restoring the Admin Status of all traps to Enable.
4.4.3.4.3 Severity
The Severity menu enables viewing a list of all traps with Severity that differs
from the default severity, updating the Severity of a selected trap and restoring
the Severities of all traps to the default severities. The Severity menu includes the
following options:
Show Traps with Modified Severity: Displays all traps with Severity that
differs from the default severity.
Update: Enables modifying the Severity of a selected trap. The updated
Severity cannot be lower than the default severity.
Restore Defaults: Enables restoring the Severities of all traps to the default
severities.
4.4.3.4.4 Suppression Interval
The Suppression Interval is the minimum time between consecutive
transmissions of the same trap. This parameter can be used to prevent excessive
retransmissions of the same trap. The Suppression Interval menu enables
viewing a list of all traps with Suppression Interval that differs from the default
suppression interval, updating the Suppression Interval of a selected trap and
restoring the Suppression Intervals of all traps to the default value of 0 (no
suppression).
The Severity menu includes the following options:
Show Traps with Modified Suppression Interval: Displays all traps with
Suppression Interval that differs from the default suppression interval, which
is 0 (no suppression).
Update: Enables modifying the Suppression Interval of a selected trap. The
available range is from 0 to 86,400 (seconds). 0 means no suppression.
WILINK I MODULAR BASE STATION SYSTEM MANUAL
Base Station Menu
69