Npu Parameters Summary; Table 4-22: Npu Monitor Parameters Summary - Nera WILINK I System Manual

Chapter 4 - Operation and Administration
4.11

NPU Parameters Summary

Parameter
Base Station Configuration Parameters
Device Name
Device Location
ATPC
Enable/Disable
Optimal Uplink RSSI
(dBm)
Operator ID
Cell ID
Base Station Alarms and Traps
Traps Display Filter-
Minimum Severity
Traps Display Filter-
Days
Traps Configuration-
Admin Status
166

Table 4-22: NPU Monitor Parameters Summary

Range
Up to 255 printable characters
Up to 255 printable characters
1 – Disable
2 – Enable
Disable is temporary until next reset
of the AUs
-103 to -50
X.X.X
X: 0-255
X.X
X: 0-255
1 – Critical
2 – Major
3 – Minor
4 – Warning
5 - Info
1 – 31 days
1 – Disable
2 – Enable
WILINK I MODULAR BASE STATION SYSTEM MANUAL
Default Run-Time
Updated
Null Yes
Null Yes
Enable Yes
-69 Yes
186.190.0 No
0.250 No
Info Yes
31 days Yes
Enable Yes