Nera WILINK I System Manual page 179

Chapter 4 - Operation and Administration
Parameter
Data Port Subnet
Mask
Data Port Gateway
Data Port
Management VLAN
ID
Data Port Speed
Data Port
Management Traffic
Enable/Disable
Authorized Manager
IP Address
Authorized Manager
Send Traps
Authorized Manager
Read Community
Authorized Manager
Write Community
Bridge Aging Time
DRAP TTL Retries
Radio Cluster Parameters
Radio Cluster ID
Name
Location
Sector Heading
Sector Beam Width
168
Table 4-22: NPU Monitor Parameters Summary
Range
IP address
IP address
0-4094 or Null for No VLAN
1 – 100 Mbps
2 – 1 Gbps
1 – Disable
2 – Enable
IP address
1 – Disable
2 – Enable
Up to 23 printable characters, case
sensitive
Up to 23 printable characters, case
sensitive
1 – 1440 minutes or null for no aging
1 – 100
1 – 6
Up to 32 printable characters
1 to 255 printable characters
0 – 359 (degrees)
0 – 359 (degrees)
WILINK I MODULAR BASE STATION SYSTEM MANUAL
Default Run-Time
Updated
255.255.255.0 No
0.0.0.0 No
Null No
100 Mbps No
Enable No
NA Yes
NA Yes
NA Yes
NA Yes
10 minutes Yes
4 Yes
Yes
Null Yes
The string defined for Yes
the Location
parameter in Base
Station menu
0 Yes
90 Yes