Nera WILINK I System Manual page 87

Chapter 4 - Operation and Administration
the Main version and will be the version to be used after reset. To avoid
unintentional actions you will be prompted to confirm the request.
4.5.2.5 Create Backup
The Create Backup option enables creating backup files of the Base Station
configuration. The backup file contains copies of all the applicable configuration
files and databases in the system.
The following backup file types can be created:
Full: The entire Base Station configuration (excluding Passwords and basic IP
parameters of the MGMT and DATA ports - IP Address, Subnet Mask and
Default Gateway).
Profiles: All the profiles associated with services (Service Profiles, Forwarding
Rules, Priority Classifiers, QoS Profiles).
Profiles and Services: All the profiles and configurations associated with
service (General Service parameters, Subscribers, Services, Service Profiles,
Forwarding Rules, Priority Classifiers, QoS Profiles).
Filtering: All the configurations of Filtering Rules, Interface Filtering and
MAC Address Deny List.
Traps Configuration: The configuration parameters for all traps.
Upon selecting the backup type option, you will be requested to confirm the
request. After confirmation, a message is displayed indicating that the backup file
creation is in process. Upon successful completion of the process, a completion
message will be displayed.
If a backup file of the same type already exists in the NPU, you will be asked
whether to overwrite the existing file. If there was an error in the process of
creating a backup file, an error message will be displayed, specifying the reason.
To upload/download the Backup File:
After the backup file has been created, it can be uploaded using a DOS based
TFTP Client application to a target directory. To upload the file, use the
command:
tftp -i <Port IP address> get <file name> <destination address>.
The default file name is:
Full: backup.res.
76
WILINK I MODULAR BASE STATION SYSTEM MANUAL