Nera WILINK I System Manual page 106

4.8.2 SW Files in NPU
Up to three AU SW files can be stored in the NPU. Any of the available files can be
loaded by the NPU to a selected AU. When three AU files are stored in the NPU, a
new file cannot be added until at least one of the existing files is deleted. This
menu enables viewing the current AU SW files stored in the NPU and deleting
selected file(s).
4.8.2.1 Show Files
Select this option to display the AU SW files currently stored in the NPU. For each
available SW file, the file name and the version are shown.
4.8.2.2 Delete a File
Select this option and enter the name of an existing AU SW file to delete it from
the NPU's memory.
4.8.3 Select
Use this option and select a slot to access the AU Slot # menu that will enable
managing and configuring the AU in the selected slot, or pre-configuring the AU
that will be installed in the slot at a later time.
The available AU slot IDs are 1-4, 7-9.
4.8.4 AU Slot # Menu
The AU Slot # menu enables managing and configuring the AU in the selected
slot, or pre-configuring the AU that will be installed in the slot at a later time. The
AU Slot # menu includes the following options:
Show
Unit Control
Configuration
Performance Monitoring
WILINK I MODULAR BASE STATION SYSTEM MANUAL
AU Menu
95