Nera WILINK I System Manual page 147

Chapter 4 - Operation and Administration
4.10.4.1.1 Show
Select this option to view the current values/options of the General parameters.
4.10.4.1.2 Update
Select this option to update any of the General parameters. The General
parameters are:
4.10.4.1.2.1 Service Mode
The Service Mode of the base station.
The available options are:
1 – Advanced
2 – Quick
For more information on Service Modes refer to Section 4.10.1.4.
The default Service Mode is Quick (2).
4.10.4.1.2.2 Default L2/Voice Service Profile
The default L2 or Voice Service Profile to be used by temporary SUs in Quick
Mode.
Available profiles – any of the L2 or Voice Service Profiles existing in the database.
4.10.4.1.2.3 Default PPPoE Service Profile
The default PPPoE Service Profile to be used by temporary SUs in Quick Mode.
Available profiles – any of the PPPoE Service Profiles existing in the database.
4.10.4.2 Subscribers
The Subscribers menu enables defining new Subscribers, viewing or editing
details of previously defined Subscribers and removing Subscribers from the
database.
The Subscribers database in the NPU can hold up to 1024 Subscribers.
The configurable Subscriber's parameters are:
4.10.4.2.1 Subscriber Name
This is the name of the subscriber, which must be unique for the entire network.
A Subscriber Name consists of up to 32 printable characters.
4.10.4.2.2 First Name
An optional parameter for information purposes.
A First Name consists of up to 50 printable characters.
136
WILINK I MODULAR BASE STATION SYSTEM MANUAL