Nera WILINK I System Manual page 183

Chapter 4 - Operation and Administration
Parameter
SU Phy Parameters
Bandwidth (MHz)
Uplink (Tx)
Frequency (MHz)
SU Multirate and ATPC Parameters
Uplink Rate
SU Ethernet Port Parameters
Ethernet Port
Configuration
SU Password
Password
172
Table 4-22: NPU Monitor Parameters Summary
Range
1 – 1.75
2 – 3.5
Note: PRO CPE supports only a 3.5
MHz Bandwidth
Depends on Frequency Bands Group
available for the AU, and the
Bandwidth.
Applicable only if Multirate in AU is
disabled:
1 – BPSK 1/2
2 – BPSK 3/4
3 – QPSK 1/2
4 – QPSK 3/4
5 – QAM16 1/2
6 – QAM16 3/4
7 – QAM64 2/3
8 – QAM64 3/4
1 – 10 Mbps Half Duplex
2 – 10 Mbps Full duplex
3 – 100 Mbps Half Duplex
4 – 100 Mbps Full Duplex
5 – Auto Negotiation
Up to 20 printable characters, case
sensitive
WILINK I MODULAR BASE STATION SYSTEM MANUAL
Default Run-Time
Updated
No
No
New SU: Uplink Basic Yes
Rate.
Connected SU: Last
used rate.
Auto Negotiation No
installer Yes