Nera WILINK I System Manual page 187

Chapter 4 - Operation and Administration
Parameter
Services - Priority Classifiers Parameters
Priority Classifier
Name
Priority Type
Uplink Priority
Ranges
Uplink QoS Profiles
Downlink Priority
Ranges
Downlink QoS
Profiles
176
Table 4-22: NPU Monitor Parameters Summary
Range
Up to 32 printable characters
1 – DSCP
2 – 802.1p
Up to 4 numbers separated by
commas, where each number must
be higher than its predecessor and
the last number must be the highest
available for the applicable priority
type (7 for 802.1p, 63 for DSCP).
Up to four QoS Profile Names
separated by commas, where each
name (up to 32 printable characters)
is a name of a QoS Profile that exists
in the database. The number of
entries in the list must be identical to
number of entries in Uplink Priority
Ranges list.
Up to 4 numbers separated by
commas, where each number must
be higher than its predecessor and
the last number must be the highest
available for the applicable priority
type (7 for 802.1p, 63 for DSCP).
Up to four QoS Profile Names
separated by commas, where each
name (up to 32 printable characters)
is a name of a QoS Profile that exists
in the database. The number of
entries in the list must be identical to
number of entries in Downlink Priority
Ranges list.
WILINK I MODULAR BASE STATION SYSTEM MANUAL
Default Run-Time
Updated
Yes
Yes
Yes
Yes
Yes
Yes