Nera WILINK I System Manual page 117

Chapter 4 - Operation and Administration
The available options are listed in Table 4-5.
The default rate is the lowest rate BPSK 1/2 (rate 1).
4.8.4.3.4.3 Downlink Basic Rate
The Basic Rate for all downlinks.
The available options are listed in Table 4-5.
The default rate is the lowest rate BPSK 1/2 (rate 1).
4.8.4.3.5 Voice Parameters
The Voice Parameters option includes a single parameter, Maximum Number of
Voice Calls:
4.8.4.3.5.1 Maximum Number of Voice Calls
This parameter sets the upper limit of simultaneous voice calls that will be
supported by the AU.
The range is from 0 to 300 Voice Calls.
The default is 50.
4.8.5 Performance Monitoring
The AU Performance menu includes the following options:
Ports Counters
BER Test
Burst Error Rate Counters
4.8.5.1 Ports Counters
The Ports Counters option enables viewing or resetting the Back-Panel and
Wireless ports counters. The information displayed for each counter is the
accumulated number since the last time the counters were reset. The counters
are reset each time the AU is reset, or upon activating the Reset option.
NOTE
The Back-Panel port of the AU is the internal Ethernet port between the AU and the NPU.
The counters describe the traffic at the Back-Panel and Wireless ports, as follows:
Back-Panel Port Counters
106
WILINK I MODULAR BASE STATION SYSTEM MANUAL