Nera WILINK I System Manual page 152

Modular
Table of Contents

Advertisement

The configurable Service Profile's parameters are:
4.10.4.4.1 Service Profile Name
A Service Profile Name consists of up to 32 printable characters.
4.10.4.4.2 Service Type
The Service Type of the Service Profile. The Service Type parameter is
configurable only when defining a new Service Profile (Add). It is not changeable.
The currently available Service Type options are:
1 – L2
2 – PPPoE
3 - Voice
For more details refer to Section 4.10.1.2.
4.10.4.4.3 VLAN Transparency Mode
The VLAN Transparency Mode defines the method of transferring packets to the
operator's upstream network.
When set to On, data packets sent from the Base Station to the backbone will be
transferred transparently. The VPL ID parameter is not applicable to Service
Profiles with VLAN Transparency Mode On.
Also The Forwarding Rule selection parameter is not applicable to transparent
Service Profiles. All transparent Service Profiles share a single pre-configured
Forwarding Rule, and a pre-configured QoS Profile for multicasts. For details on
these profiles refer to Table 4-20 and Table 4-21 on page 165. The pre-configured
Transparent Forwarding Rule can be modified but not deleted.
For tagged packets, the VPL ID will be their VLAN tag.
For untagged packets, the VPL ID will be None.
For packets received from the network, the forwarding decision will be according
to the packet's VPL ID. If the VPL ID is unknown (either None or not included in
the list of VPL IDs defined for any of the existing, non-transparent Service
Profiles), the system will assume this is a transparent VLAN packet (if at least one
transparent Service is defined) and transfer it with the original VLAN tag (or
untagged if there is no VLAN tag).
NOTE
The combination of VLAN Transparency Service On, Hybrid VLAN Mode Off and an empty VLAN
List means that all packets are forwarded. This combination should be used only if the Service
Provider can ensure that there will not be conflicts between VLAN IDs used by devices behind the
SU and existing VPL IDs.
WILINK I MODULAR BASE STATION SYSTEM MANUAL
Services Menu
141

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents