Nera WILINK I System Manual page 78

The Cell ID consists of 2 groups of up to three digits each, where the range for
each group is 0 to 255.
The default Operator ID is 0.250.
Changes in the value configured for the Cell ID are applied only after reset.
4.4.3 Alarms and Traps
The Alarms and Traps menu enables viewing the active alarms or the traps log,
filtering the displayed traps and enabling/disabling traps. The available options
are:
Show Active Alarms
Traps Display Filter
Show Traps Log
Trap Configuration
4.4.3.1 Show Active Alarms
Select to view the currently active alarms. For more details on active alarms refer
to Appendix B - Traps and
4.4.3.2 Traps Display Filter
Select to view/update the filtering criteria for the Traps Log display. The
configurable filtering criteria are:
4.4.3.2.1 Minimum Severity
The Minimum Severity parameter enables defining the minimum severity filter.
Traps whose severity is below the defined severity will not be displayed.
The options are Critical, Major, Minor, Warning and Info.
The default is Info severity, which means that all the traps in the log will be
displayed.
4.4.3.2.2 Days
The Days parameter enables defining the period for which traps will be displayed.
The available options are from 1 to 31 days. Only traps that occurred within the
last N days, where N is the value selected for this parameter, will be displayed.
The default is 31 days.
WILINK I MODULAR BASE STATION SYSTEM MANUAL
Alarms.
Base Station Menu
67