Table 4-9: Ct Values - Nera WILINK I System Manual

4.10.4.7.2 QoS Type
The QoS Type that defines the QoS parameters that are applicable to the service.
The available options are:
1 – CG (Continuous Grant)
2 – RT (Real Time)
3 – NRT (Non real time)
4 – BE (Best Effort)
4.10.4.7.3 CT (RT, NRT and BE QoS Types)
The CT (Committed Time) parameter defines the time window over which the
information rate is averaged to ensure compliance with the CIR or MIR
parameter. It is used also to prioritize bandwidth allocation to connections, where
for each QoS Type, connections with a shorter CT get higher priority.
The available options are Short (1), Medium (2), and Long (3).
The actual value in milliseconds for each of the three options varies according to
the QoS type:
CT
Short
Medium
Long
4.10.4.7.4 CIR (RT and NRT QoS Types)
CIR is the information transfer rate that the system is committed to transfer
under normal conditions. The rate is averaged over a minimum increment of
time, which is defined by the CT parameter.
The range is from 0 to 12,000 Kbps.
4.10.4.7.5 MIR (NRT and BE QoS Types)
MIR is the maximum information rate that the system will allow for the
connection. The rate is averaged over a minimum increment of time, which is
defined by the CT parameter.
The range is from 1 to 12,000 Kbps.
MIR cannot be lower than CIR (applicable to NRT QoS type).
WILINK I MODULAR BASE STATION SYSTEM MANUAL

Table 4-9: CT Values

BE
50mS
100mS
1sec
NRT
50mS
100mS
1Sec
Services Menu
RT
50mS
100mS
200mS
151