Nera WILINK I System Manual page 7

This manual describes the WILINK I Base Station equipment Release 2.0 and
details how to install, operate and manage the system components.
This manual is intended for technicians responsible for installing, setting and
operating the WILINK I Base Station equipment, and for system administrators
responsible for managing the system.
This manual contains the following chapters and appendices:
Chapter 1 – System description: Describes the WILINK I system and its
components.
Chapter 2 – Installation: Describes how to install the Base Station system
components.
Chapter 3 – Commissioning: Describes how to configure basic parameters
and validate units' operation.
Chapter 4 – Operation and Administration: Describes how to use the
Monitor application for configuring parameters, checking system status and
monitoring performance.
Appendix A – Software Upgrade: Describes how to load new software files
using TFTP, and how to switch to a new software version in WILINK I units.
Appendix B – Defining Service Profiles for Generic VoIP Gateways:
Describes the principles of defining Service Profiles for 3
(non-DRAP-based) VoIP devices.
About This Manual
rd party generic