Before You Start - Nera WILINK I System Manual

Appendix A - Software Upgrade
A.1

Before you Start

NOTE
This section describes software upgrades using the Monitor program. The upgrade procedure can
also be performed using bwaNMS. For instructions on using bwaNMS for software upgrade, refer to
"The Software Upgrade Manager" section in the bwaNMS User Manual.
Loading of new SW files to the unit's FLASH memory can be performed by a
simple loading procedure using a TFTP application.
Before performing an upgrade procedure, be sure you have the most recent
instructions, and that the correct SW files are available in your computer.
If you are loading new SU/AU SW files, verify that no more than two SU/AU SW
files exist in the NPU/ BST. If there are three SU/AU SW files in the unit, one of
them must be deleted before loading a new SU/AU SW file.
To view the current SU/AU SW files in NPU/ BST:
Select SU/AU > SW Files in NPU/ BST > Show Files .
To delete an SU/AU SW file from NPU/ BST:
Select SU/AU > SW Files in NPU/ BST > Delete a File and enter the name of the
file to be deleted.
182
WILINK I MODULAR BASE STATION SYSTEM MANUAL