Nera WILINK I System Manual page 137

Chapter 4 - Operation and Administration
Error Rate
The counters are reset each time the SU is reset, or upon activating the Reset
option.
4.9.6.5 Show MAC Addresses Behind SU
Select this option to view a list of the MAC Addresses of the devices behind the
SU. If VLAN behind the SU is used, the VLAN ID(s) used by each device are
displayed next to their MAC Address.
4.9.6.6 Delete
This option enables deleting the selected SU from the database.
4.9.7 Add New SU
Select the Add New SU option to add a new SU to the database. The Add New SU
sub-menu includes the following parameters:
SU MAC Address
SW File Name: The SW File to be used by the SU. Should be either a File
Name known to exist in the SU or an SU SW File Name in the NPU.
Operation: The action to be performed with the specified SW File after the SU
connects to the AU (None, Download, Run from Shadow or Set as Main).
A new SU that attempts to communicate with the base station when the base
station operates in Advanced Mode will be registered only if its MAC address
exists in the database.
126
WILINK I MODULAR BASE STATION SYSTEM MANUAL