Nera WILINK I System Manual page 92

Modular
Table of Contents

Advertisement

4.5.3.2.4 Data Port Management VLAN
This parameter defines the VLAN ID for management frames via the Data port. If
a value from 0 to 4094 is configured for the Management VLAN ID, then the
device will accept management frames only if their VLAN tag is the same as this
value.
Available values are 0-4094 or null (empty) for No VLAN.
The default is null (No VLAN).
4.5.3.2.5 Data Port Speed
The speed of the Data port's Ethernet interface that operates always in
full-duplex mode. Auto negotiation is not supported.
The available options are 100 Mbps and 1 Gbps.
The default speed is 100 Mbps.
4.5.3.2.6 Data Port Management Traffic Enable/Disable
The Data Port Management Traffic Enable/Disable parameter allows
enabling/disabling remote management traffic via a router connected to the
DATA port. This parameter does not affect management traffic via the local
subnet defined by the Data Port IP Address and Data Port Subnet Mask.
If remote management for the Data port is disabled, then the unit can be
managed by any PC on any of the following subnets (provided the PC is defined as
an Authorized Manager):
A
The local subnet of the Management port (defined by the Management Port IP
Address and Management Port Subnet Mask parameters).
B
The local subnet of the Data port (defined by the Data Port IP Address and
Data Port Subnet Mask parameters).
C
Any subnet reachable via the Gateway of the Management port (if defined).
Note that in this case the Static Route (if defined) is ignored, and the defined
Gateway becomes the default Gateway, enabling remote management by any
PC reachable via the Gateway.
If remote management is enabled for both the Data Port and the Management
port, then the unit can be managed by any PC on any of the following subnets
(provided the PC is defined as an Authorized Manager):
A
The local subnet of the Management port (defined by the Management Port IP
Address and Management Port Subnet Mask parameters).
B
The local subnet of the Data port (defined by the Data Port IP Address and
Data Port Subnet Mask parameters).
WILINK I MODULAR BASE STATION SYSTEM MANUAL
NPU Menu
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents