Nera WILINK I System Manual page 184

Parameter
SU Bridging Parameters
Enable/Disable Limit
on Number of
Supported Devices
Maximum Number of
Supported Devices
Bridge Aging Time
Services - General Parameters
Service Mode
Default L2/Voice
Service Profile
Default PPPoE
Service Profile
Services - Subscribers Parameters
Subscriber Name
First Name
Last Name
Description
Admin Status
Servics - Services Parameters
Service Name
Subscriber Name
WILINK I MODULAR BASE STATION SYSTEM MANUAL
Table 4-22: NPU Monitor Parameters Summary
Range
1 – Disable
2 – Enable
1 – 512
1 – 1440 minutes
1 – Advanced
2 – Quick
Name of an existing L2 or Voice
Service Profile, or None.
Name of an existing PPPoE Service
Profile, or None.
Up to 32 printable characters. Must
be unique in the network.
Up to 50 printable characters.
Up to 50 printable characters.
Up to 50 printable characters.
1 – Disabled
2 – Enabled
Up to 32 printable characters.
A Subscriber Name (up to 32
printable characters) that exists in the
database
NPU Parameters Summary
Default Run-Time
Updated
Disable Yes
512 Yes
3 minutes Yes
Quick Yes
Internet Access L2 Yes
None Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
173