Disabling A Smart Key - Yamaha TMAX 2020 Service Manual

EAS31537

DISABLING A SMART KEY

If a smart key is lost or stolen, the smart key can be disabled.
1. Place all of the smart keys "1" 300 cm (118.1 in) "a" or more away from the vehicle or lock the com-
munication.
2. Perform steps (1) to (7) in "SMART KEY SYSTEM EMERGENCY MODE" on page 8-80.
3. While the smart key system indicator light " " is on for 10 seconds, perform the following procedure.
a. While pushing the OFF/LOCK switch "1", push the Parking/Unlock switch "2" 3 times. Then, re-
lease both switches.
4. Check that the smart key system indicator light " " goes off (the smart key disable mode is activat-
ed).
5. Turn on (unlocked setting) the smart keys that you want to enable and place them within 80 cm (31.5
in) of the remote control unit.
6. Push the OFF/LOCK switch 1 time to start the communication between the remote control unit and
the smart keys that are located within 80 cm (31.5 in) of the unit.
TIP
The number of smart keys that currently can be used will be indicated.
Number of flashes = Number of verified smart keys. (1 cycle of on for 0.3 second and off for 0.3 second
= 1 smart key)
7. Push the OFF/LOCK switch and Parking/Unlock switch simultaneously for 2 seconds. The use of
only the verified smart keys will be enabled. The use of all other smart keys will be disabled.
TIP
If the procedure was not completed successfully, repeat the procedure from step (1).
1
a
2
8-84
SMART KEY SYSTEM
1