Yamaha TMAX 2020 Service Manual page 343

Removing the throttle body
3.5 N ・ m (0.35 kgf ・ m, 2.6 lb ・ ft)
New
New
New
8
6
3.8 N ・ m (0.38 kgf ・ m, 2.8 lb ・ ft)
10 N ・ m (1.0 kgf ・ m, 7.4 lb ・ ft)
Order
Windshield/Front cover/Windshield inner panel/
Meter assembly/Rearview mirror/Bottom side
cowling/Side panel/Front cowling assembly/Leg
shield assembly
Center cover/Fuel tank cover assembly/Side
cover/Rear side cowling assembly/Footboard
Fuel tank
Air filter case
Canister purge hose (hose joint to canister)
1 Throttle servo motor coupler
2 Throttle position sensor coupler
3 Intake air pressure sensor coupler
4 Injector coupler
5 Throttle body joint clamp screw
6 Intake air pressure sensor hose
7 Throttle body assembly
8 Intake air pressure sensor
New
New
New
7
5
(3)
Job/Parts to remove
3
1
5
Q'ty
Refer to "GENERAL CHASSIS (1)" on
page 4-1.
Refer to "GENERAL CHASSIS (2)" on
page 4-11.
Refer to "FUEL TANK" on page 7-1.
Disconnect.
Refer to "THROTTLE BODY" on page 7-5.
Disconnect.
Refer to "FUEL TANK" on page 7-1.
1 Disconnect.
1 Disconnect.
1 Disconnect.
2 Disconnect.
2 Loosen.
1
1
1
7-6
THROTTLE BODY
4
2
3.0 N ・ m (0.30 kgf ・ m, 2.2 lb ・ ft)
Remarks