Yamaha TMAX 2020 Service Manual page 59

1. Seat/fuel lid lock solenoid coupler
2. Seat lock cable
3. Tail/brake light lead (right)
4. Tail cover
5. Tail/brake light
6. Tail/brake light lead (left)
7. Storage box light
8. Windshield drive unit relay (up)
(for XP560D)
9. Windshield drive unit relay (down)
(for XP560D)
10. Seat heater relay (control) (for XP560D)
11. Seat heater relay (power) (for XP560D)
12. Radiator fan motor relay
13. Turn signal/hazard relay
14. Wire harness
15. Storage box light switch lead
A. Route the lead along the edge of the filler
cover.
B. Make sure the seat lock cable does not get
caught.
C. Pass the tail/brake light lead (right) through
the hole.
D. Install the seat/fuel lid lock solenoid lead to
the rib of the filler cover.
E. Use the projection on the tail cover to
press on the storage box light switch lead.
2-30
CABLE ROUTING