Yamaha TMAX 2020 Service Manual page 15

TIP
After resetting the average fuel consumption dis-
play, "– –.–" will be shown until the vehicle has
traveled 1 km (0.6 mi).
ECA25730
NOTICE
If there is a malfunction, "– –.–" will be con-
tinuously displayed. Check the vehicle.
Instantaneous fuel consumption
The instantaneous fuel consumption mode
"CRNT.F" can be set to "km/L" or "L/100km".
TIP
If traveling at speeds under 10 km/h (6mi/h), "– –
.–" will be displayed.
ECA25730
NOTICE
If there is a malfunction, "– –.–" will be con-
tinuously displayed. Check the vehicle.
Setting mode
1. Setting mode display
Stop the vehicle and then push the "MENU"
switch for 1 second to enter the setting mode. To
exit the setting mode and return to the standard
display mode, push the "MENU" switch again for
1 second or select "
TIP
When the engine trouble warning light or a sys-
tem indicator light is on, the setting mode may be
restricted.
1
".
1-6
Menu items
Display
This function allows you to
set the low, middle, and high
Grip Warmer
settings to 10 temperature
levels.
This function allows you to
set the low, middle, and high
Seat Heater
settings to 10 temperature
levels.
This function allows you to
Traction Con-
turn the traction control sys-
trol
tem on or off.
This function allows you to
check and reset the oil
change interval (indicator),
Maintenance
V-Belt change interval (indi-
cator), and the "Free" main-
tenance interval.
This function allows you to
switch the fuel consumption
Unit
units between "L/100km" and
"km/L".
This function allows you to
Display change the items shown in 3
information displays.
This function allows you to
Brightness adjust the brightness of the
instrument panel.
This function allows you to
Clock
set the clock.
This function allows you to
reset all items to their factory
preset or default settings; ex-
All Reset
cepting the odometer, clock,
and maintenance counter
items "Oil" and "V-Belt".
Grip warmer settings
1. Use the select switch to highlight "Grip
Warmer".
FEATURES
Description