3. Wire harness continuity.
• Disconnect the radiator fan motor relay coupler, ECU coupler and ignition fuse.
• Open circuit check
Between radiator fan motor relay coupler "1"
and ignition fuse holder "3"
Between radiator fan motor relay coupler "1"
and ECU coupler "2"
3
Is resistance 0 ?
YES
Go to "Short circuit check".
NO
a. Replace the wire harness.
b. Push the ON/start switch, and then check the condition of the DTC using the malfunction mode
of the YDT.
Is it in the "Recovered" condition?
YES
Go to step 6, and complete the service.
NO
Go to "Short circuit check".
• Short circuit check
TIP
Disconnect the ECU related connectors before checking.
Refer to "PARTS CONNECTED TO THE ECU" on page 9-3.
Ground short circuit check "A"
Between radiator fan motor relay coupler "1"
and ground
Lines short circuit check "B"
Radiator fan motor relay coupler "1"
ECU coupler "2"
red/white–red/white
yellow/red–yellow/red
1
Br/B
L
R/W
Y/R
yellow/red–ground
red/white–ground
yellow/red–any other coupler terminal
red/white–any other coupler terminal
yellow/red–any other coupler terminal
9-113
P0480
2
Y/R
B/G
O
Y/W
G/B
R/B
B
R/L
Y/R
B
R
Y/W
L/Y
R/L
B
B