Yamaha TMAX 2020 Service Manual page 204

Removing the handlebar switch and throttle grip
F W F W
D D
7
1.8 N ・ m (0.18 kgf ・ m, 1.3 lb ・ ft)
26 N ・ m (2.6 kgf ・ m, 19 lb ・ ft)
* YAMAHA GREASE "F"
Order
Rear brake lock cable adjusting nut
Windshield/Front cover/Rearview mirror/Wind-
shield inner panel/Meter assembly/Bottom side
cowling/Side panel/Front cowling assembly/Leg
shield assembly
Center cover/Fuel tank cover assembly/Rear
side cowling assembly/Side cover/Footboard
Handlebar cover
1 Front brake light switch connector
2 Front brake master cylinder holder
3 Front brake master cylinder assembly
4 Handlebar switch (right)
5 Throttle cable
6 Throttle cable (throttle grip side)
7 Grip end
8 Throttle grip
3.5 N ・ m (0.35 kgf ・ m, 2.6 lb ・ ft)
4.5 N ・ m (0.45 kgf ・ m, 3.3 lb ・ ft)
5
3.8 N ・ m (0.38 kgf ・ m, 2.8 lb ・ ft)
Job/Parts to remove
3
1
2
10 N ・ m (1.0 kgf ・ m, 7.4 lb ・ ft)
3.5 N ・ m (0.35 kgf ・ m, 2.6 lb ・ ft)
Q'ty
Loosen.
Refer to "REAR BRAKE" on page 4-50.
Refer to "GENERAL CHASSIS (1)" on
page 4-1.
Refer to "GENERAL CHASSIS (2)" on
page 4-11.
Refer to "HANDLEBAR" on page 4-74.
2 Disconnect. (for XP560E)
1
1
1
2 Disconnect.
2 Disconnect.
2
1
4-75
HANDLEBAR
26 N ・ m (2.6 kgf ・ m, 19 lb ・ ft)
8
4
1
6
3.8 N ・ m (0.38 kgf ・ m, 2.8 lb ・ ft)
Remarks
7