EAS20633
P2158
EAS33113
TROUBLESHOOTING
Item
Front wheel sensor: no normal signals are received from the front wheel sensor.
Fail-safe system
• Able to start engine
• Able to drive vehicle
Procedure
1. Connection of front wheel sensor coupler.
• Check the locking condition of the coupler.
• Disconnect the coupler and check the pins (bent or broken terminals and locking condition of the
pins).
Is the coupler condition normal?
YES
Go to step 2.
NO
a. Connect the coupler securely or replace the wire harness.
b. Execute the diagnostic mode. (Code D16)
c. Rotate the front wheel by hand and check that the indicated value increases.
Is that value increased?
YES
Go to step 8, and complete the service.
NO
Go to step 2.
2. Connection of ABS ECU coupler.
• Check the locking condition of the coupler.
• Disconnect the coupler and check the pins (bent or broken terminals and locking condition of the
pins).
Is the coupler condition normal?
YES
Go to step 3.
NO
a. Connect the coupler securely or replace the wire harness.
b. Execute the diagnostic mode. (Code D16)
c. Rotate the front wheel by hand and check that the indicated value increases.
Is that value increased?
YES
Go to step 8, and complete the service.
NO
Go to step 3.
9-162
P2158