A
2
B
2
A. Check that the throttle valves "2" fully close.
B. Check that the throttle valves "2" open.
EAS32448
CHECKING THE WINDSHIELD DRIVE UNIT
(for XP560D)
1. Check:
• Windshield drive unit operation
Faulty/rough movement Replace.
a. Disconnect the windshield drive unit cou-
pler from the wire harness.
b. Connect the battery (DC V) to the wind-
shield drive unit terminals "1" as shown.
A
A
2
ELECTRICAL COMPONENTS
B
1
1
3V
B
1
1
1
3V
3V
A. Check that the windshield drive unit arms
B. Check that the windshield drive unit arms
EAS31016
CHECKING THE GRIP WARMERS (for
XP560D)
The following procedure applies to both of the
grip warmers.
1. Check:
• Grip warmer resistance
1
1
R Br
a. Disconnect the grip warmer coupler from
b. Connect the digital circuit tester () to the
2
8-109
2
"2" up.
"2" down.
Out of specification Replace the grip
warmer.
Grip warmer resistance (L)
1.2–1.4
Grip warmer resistance (R)
1.2–1.5
the wire harness.
grip warmer coupler as shown.
Digital circuit tester (CD732)
90890-03243
Model 88 Multimeter with
tachometer
YU-A1927
1
1
R Br
2