Positioning The Patient - Otto Bock 743L500 3D L.A.S.A.R. Posture Instructions For Use Manual

5.3 Positioning the patient

50% 50% 50% 50% 45% 45% 55% 55%
743L500 3D L.A.S.A.R. Posture
1.0 Nm 1.0 Nm
60.8 % 39.2 %
1
2
39.2 %
40% 40% 60% 60% 35% 35% 65% 65%
INFORMATION: The force measurement plate symbol
and the corresponding numeric value are shown in red
upon falling below 40%.
► Carefully position the patient on the force measure­
ment plate as shown in the illustration, observing
the following points:
→ Standing relaxed
→ Looking forward
→ Standing centred on the force measurement
plate
→ Hips parallel to the frontal plane
→ Feet hip-width apart (skeletal orientation) on the
force measurement plate
→ Toes in one line
→ Even 50%:50% load distribution (deviating val­
ues apply for prosthesis wearers depending on
the amputation level)
→ Arms hanging loose
→ Standing unsupported during measuring
Use
89