Shortening The Forearm, Positioning The Battery Box - Otto Bock 12K42 ErgoArm plus Instructions For Use Manual

Safety instructions
12K42
ErgoArm plus
Cut or grind the distal forearm to the proper
length for the individual.
Insert and bond the 10S1=45/50 lamination
ring inside the forearm.
38 | Ottobock
ErgoArm Hybrid plus
Pull the AFB out.

Shortening the forearm, positioning the battery box

Cut or grind the distal forearm to the proper
length for the individual.
Insert and bond the 10S1=45/50 lamination
ring inside the forearm.
Wiring will be completed during final as-
sembly of the prosthesis.
Attention: When mounting the battery box,
be sure it does not interfere with the AFB
or electric wrist rotator mechanism.
After mounting the battery box, plug the
battery connection cable 13E51=2/4 into
the circuit board [1] of the forearm cable.
(The circuit board is attached to the AFB.)
12K42 ErgoArm plus, 12K44 ErgoArm Hybrid plus, 12K50 ErgoArm Electronic plus
12K44
103 mm
1
12K50
ErgoArm Electronic plus