Table of Contents
Advertisement
A Status Window in the center (Fig. 43, Pos. M, page 24) will show the CPM device's current angle or a countdown
timer when it is in the Pause portion (Fig. 16) of its cycle.
Fig. 46
Knee Joint Setup
Countdown Timer
displayed
A Lock out option (Fig. 43, Pos. B, page 24) is available to prevent patients from making any changes to Patient
Controlled ROMs as well as Force, Pause Time, and Speed. This is available in the leftmost column by scrolling to the
Patient Flexion or Extension Icon (Fig. 43, Pos. B, page 24) and selecting or deselecting the icon. An X indicates that the
patient is locked out from control of that parameter.
6.2.5 Patient Profile Screen: Settings and Patient Profiles
Fig. 47
Patient Profile
Patient Profile
Current Usage
Screen
Hours
Cycles
Days Used
Days Since Reset:
Treatment
Session Duration
Sessions/Day
Memory Card
The Clinical Professional can set other parameters and also view information about patient use of a CPM Device on the
Patient Profile Screen, indicated by the Patient Profile Screen Icon (Fig. 47, Pos. A). To navigate to the Patient Profile
Screen, use the Soft Keys. Time can be set for each session as well as number of sessions per day (Fig. 47, Pos. B).
(Note: if either the Session Duration or the Sessions/Day is at zero, the session feature will be disabled.) This information
can be reset or saved to the memory card.
26
Flexion
Force
Pause
Speed
Force
Pause
Speed
Extension
Reset
Usage
PROFILE1
Load
Save to Memory Card
A. Patient profile icon
B. Treatment session setting
C. Load profile setting
Advertisement
Table of Contents
