Alignment Of The Stands And Force Measurement Plate - Otto Bock 743L500 3D L.A.S.A.R. Posture Instructions For Use Manual

Protection of medical data
Where the app allows for the input of personal data (names, addresses, etc.), such data is entered voluntarily. The
company Ottobock SE & Co. KGaA expressly states that such data shall not be shared with any third party and
shall be used exclusively for the purposes of business relations. Furthermore, any storage of personal data may be
subject to prior consent according to the respective local data protection law. Please notice that according to the
respective local data protection law, an approval from your patient to use his/her data may be required before stor­
ing personal data or pictures of him/her and of his/her prosthetic or orthotic alignments. We strive to ensure that
your data is not accessible to third parties by taking all reasonable technical and organisational precautions in stor­
ing them. However, we are unable to guarantee total data security for digital communications.

4.10 Alignment of the stands and force measurement plate

0 °
~ 9
~ 9 ~ 9
0 ° 0 °
0 °
~ 9
~ 9
0 °
743L500 3D L.A.S.A.R. Posture
1) To avoid distortion of the camera image and pos­
2) Install the cables so that excessive tilting of the
~ 9
0 °
0 ° 0 °
~ 9 ~ 9
~ 9
0 °
0 °
~ 9
sible error messages, set up the camera stands as
close to vertical as possible (close to 90°).
camera stands is avoided.
Preparing the product for use
85