Mitsubishi Electric MELSEC Q Series Reference Manual page 230

6 PROGRAMMING
No.
SB0045 Setting information (host)
SB0054 Parameter receive status
SB0055 Received parameter error
No.
SB0040 Network type (host)
SB0043 Online switch (host)
SB0044 Station setting (host)
Data link operation designation result
SB0046
(host)
SB0048 Remote master station status (host)
SB0056 Communication status
Operation designation at fault of
SB0058
(multiplexed remote master station)
SB005B END asynchronous settings
SB0064 Reserved station designation
SB0068 Communication mode
SB0069 Multiplex transmission designation
SB006B Multiplex remote function designation
6 - 35
(b) Checking the parameter status of the host (including the
switch setting on the network module)
1) Upon completion of receiving parameters, Parameter receive status
(SB0054) is turned OFF.
2) If any error is found in the parameters, the following link special relays
(SB) are turned ON.
• Setting information (host) (SB0045)
• Received parameter error (SB0055)
3) An error code is stored in Parameter setting status (SW0055).
4) If the host is a remote I/O station, the presence of intelligent function
parameters can be checked by Parameter information (SW0054).
Description
5) When the parameters are reflected in the network module, contents of
parameters are stored in the following link special relay (SB) and link
special register (SW).
Description
—
—
—
No.
SW0054 Parameter information
SW0055 Parameter setting status
No.
SW0040 Network No.
SW0042 Station No.
SW0043 Mode status
SW0044 Station setting
SW0046 Module type
SW0056 Current remote master station
SW0057 Designated remote master station
SW0059 Total number of link stations
SW0064 to
Reserved station designation
SW0067
SW0068 Communication mode
MELSEC-Q
Description
—
Description
—
—
—
—
6 - 35