Table of Contents
Advertisement
AMI Turbitrace
Instrument Setup
4.2.
4.3.
30
Programming
Program all parameters for external devices (interface, etc.). Set all
parameters for instrument operation (limits, alarms).
Run-in Period
To assure correct measurement, run the instrument at least for
2 hours, better overnight to rinse out any pollution from transport
and manufacturing and to adjust the temperature of the sample and
the instrument.
CAUTION
Wrong measuring values caused by air bubbles in the
sample.
Assure that the sample does not contain any air bubbles.
If the sample contains air bubbles, let the instrument run in for
some time so that the air bubbles can escape from the sample.
Pressurized gas can cause an explosion.
A-96.250.131 / 050220
Advertisement
Table of Contents
