Programming - Swann AMI Hydrogen QED Operator's Manual

AMI Hydrogen QED
Instrument Setup
4.1.
Sensor
parameters
External
devices
Limits, alarms
28

Programming

Check the sensor parameters in menu <Installation>\
<Sensors>\<Sensor parameters>.
The sensor characteristics are printed on the label of each sensor.
SwanSensor Hydrogen
A-87.260.001 I
xxxxxxx p: 953 hPa
The following parameters are required:
 I (saturation current)
s
 p (air pressure)
Program all parameters for external devices (interface, recorders,
etc.)
Program all parameters for instrument operation (limits, alarms).
See Program List and Explanations, p.
: 3.025 µA
s
55.
A-96.250.791 / 040219