Table of Contents
Advertisement
AMI Turbitrace
Installation
3.2.
Mounting re-
quirements
A-96.250.131 / 050220
Install the AMI Monitor
The first part of this chapter describes the preparing and placing of
the system for use.
The instrument must only be installed by trained personnel.
Mount the instrument in vertical position.
For ease of operation mount it so that the display is at eye
level.
For the installation a kit containing the following installation
material is available:
– 6 Screws 6x60 mm
– 6 Dowels
– 6 Washers 6.4/12 mm
The instrument is only intended for indoor installation. For dimen-
sions see figure
Dimensions, p.
12.
15
Advertisement
Table of Contents
