Program Overview; Messages (Main Menu 1); Diagnostics (Main Menu 2) - Swann AMI Turbitrace Operator's Manual

AMI Turbitrace

Program Overview

8.
8.1.
Pending Errors
1.1*
Message List
1.2*
Maintenance List
1.3*
8.2.
Identification
2.1*
A-96.250.131 / 050220
Program Overview
For explanations about each parameter of the menus see
List and Explanations, S. 55
 Menu 1 Messages informs about pending errors and mainte-
nance tasks and shows the error history. Password protection
possible. No settings can be modified.
 Menu 2 Diagnostics is always accessible for everybody. No
password protection. No settings can be modified.
 Menu 3 Maintenance is for service: Verification, simulation of
outputs and set time/date. Please protect with password.
 Menu 4 Operation is for the user, allowing to set limits, alarm
values, etc. The presetting is done in the menu Installation
(only for the System engineer). Please protect with password.
 Menu 5 Installation: Defining assignment of all inputs and
outputs, measuring parameters, interface, passwords, etc.
Menu for the system engineer. Password strongly recom-
mended.

Messages (Main Menu 1)

Pending Errors
Number
Date, Time
Maintenance List

Diagnostics (Main Menu 2)

Designation
Version
Version TURBI3
Factory Test
2.1.4*
1.1.5*
1.2.1*
1.3.5*
AMI Turbitrace
V6.20-09/16
1.01
Program
* Menu numbers
51