Swann AMI Turbitrace Operator's Manual page 11

AMI Turbitrace
Product Description
On-line
Operation
A-96.250.131 / 050220
The sample flows through the sample inlet [F] via solenoid valve
[G] and the manual 5 way valve [E] into the measuring chamber [B],
where the turbidity is measured. From there it flows through the
sample outlet [C] and the pressure regulator [K]. The pressure reg-
ulator is used to regulate the sample flow. Then the sample flows
via capillary [L] and flow meter [M] into the drain funnel [N].
To keep the measuring chamber clean and free from deposits it can
be cleaned by opening the drain valve [D].
A B
LINE
CAL
F G H
E
K
L
A Humidity absorber
B
Measuring chamber
C Sample outlet
D
Drain valve
E Manual 5 way valve
F Sample inlet
G
Solenoid valve
Cal Empty
Zero
Line
EMPTY
I
E J
M
H Calibration inlet
I
Manual outlet
J Zero point filter
K Pressure regulator valve
L
Capillary
M Flow meter
N
Drain funnel
C D
N
9