Agilent Technologies 6850 Series Service Information page 61

Split/Splitless inlet
Inlet insert weldment
WARNING
High temperature. The inlet may be very hot.
Before beginning, turn off the inlet heated
zone and allow it to cool.
1. Load the SERVICE method (or turn off the
GC) and allow the inlet to cool.
2. Remove the top cover. See
page 1-23.
Released: April 2004
3. Use the inlet wrench to release the large nut,
"Lid top cover" on
4. Lift the inlet insert weldment free of the
6850 Series Gas Chromatograph Service Procedures
which is part of the inlet insert weldment.
Large nut
(part of weldment)
Inlet insert weldment
inlet.
61