Agilent Technologies 6850 Series Service Information page 158

Replacement procedures
Thermal conductivity detector
TCD cell
1. Open the lid.
2. Remove the column.
3. If installed, remove the TCD capillary
adapter using a 7/16-inch wrench.
4. Open the lid to the service position. See
"Raising the lid to the service position"
page 1-17.
Released: April 2004
on
6850 Series Gas Chromatograph Service Procedures
PRT wires
TCD filament block
Filament wires
Heater/Sensor wires
Capillary adapter
158