Agilent Technologies 6850 Series Service Information page 21

To remove the front cover:
1. Unscrew the two T-20 Torx screws at the
bottom of the front cover.
Front cover
Remove these screws
2. Open the lid.
Released: April 2004
3. Remove the two T-20 Torx screws in the top
Remove
4. Press the two lid latch release buttons (on
6850 Series Gas Chromatograph Service Procedures
of the front cover.
either side of the instrument's front, toward
the top) until they disengage from the front
panel.
21