Advertisement
4. Remove the two 7-mm nuts and lock
washers.
Main board
assembly
LAN bracket
Screws holding
LAN bracket to
main board
Nuts holding main board
and LAN bracket to GC
5. Open the lid.Lift the main board and bracket
assembly and slide it out of the chassis.
Released: April 2004
6. Remove the LAN bracket from the main
7. Transfer the LAN bracket to the new main
6850 Series Gas Chromatograph Service Procedures
board by removing the two T-20 Torx
screws.
board assembly.
247
Hide quick links:
Advertisement
