Agilent Technologies 6850 Series Service Information page 140

Replacement parts
Thermal conductivity detector
Description
1. Screw, M4 × 12 mm, captive
Torx, T20
2. Thermal cover
3. Top insulation
4. Screw, M4 × 0.7 × 8 mm, chrome
plated
5. O-rings, HPM8 (Order no. 5180-
4181, 12/pkg)
6. Screw, M4 × 10 mm, Torx, T20
7. TCD assembly
8. Column adapters:
9. TCD capillary
10. – 1/8-inch nut (10/pkg)
11. – 1/8-inch vespel ferrule,
graphitized (10/pkg)
Released: April 2004
Part no. Qty
0515-2496 2
G1532-00040 1
G1532-00020 1
0515-2711 2
0905-1039 3
0515-2495 1
G1532-60675 1
1
G1532-80540 –
5180-4103 –
0100-1332 –
6850 Series Gas Chromatograph Service Procedures
12. TCD packed, 1/8-inch Tube to
1/4-inch Female (not shown)
13. – 1/8-inch nut (10/pkg)
14. – 1/8-inch vespel ferrule (10/pkg)
15. Column ferrules:
16. – Graphite, 0.5-mm id (10/pkg)
17. – Graphite, 1.0-mm id (10/pkg)
18. Column nut (2/pkg)
19. TCD signal board*
20. Heater/Sensor assembly
21. PRT
22. TCD mounting pallet
23. Bottom insulation
24. TCD seal insulation
25. TCD vent restrictor kit (not
shown)
* For TCDs manufactured before June 1997, order upgrade kit
G1532-60540 to replace TCD signal board part no. G1532-60010.
G1532-20710 –
5180-4103 –
0100-1332 –
5080-8853 –
5080-8773 –
5181-8830 1
G1532-60015 1
G1531-61140 1
G1531-60660 1
G1532-00030 1
G1532-00010 1
G1532-00080 1
G1532-60700
140