Set Up A Wideband Standard Headset; Enable Electronic Hookswitch Control On Your Phone; Make A Call With A Standard Headset - Cisco 7800 Series Accessories Manual

Set Up a Wideband Standard Headset

Set Up a Wideband Standard Headset
You can use a headset that supports wideband audio. Wideband audio improves the quality of the sound you
hear in the headset.
Procedure
Step 1 Press Applications
Step 2
Select Accessories > Analog headset > Setup.
Step 3 Press On or Off to enable or disable wideband for the analog headset.
Step 4 Press Return .

Enable Electronic Hookswitch Control on Your Phone

If your administrator has enabled Admin settings on your Cisco IP Phone, you can enable or disable electronic
hookswitch control to connect with a Cisco Headset 560 Series base. Electronic hookswitch control is enabled
by default.
Note This feature is available on Cisco IP Phone Firmware Release 12.7(1) and later.
Procedure
Step 1
On your phone, press Applications
Step 2 Navigate Admin settings > Aux port.
Step 3
Select Connect e-hook headset to enable electronic hookswitch control.

Make a Call with a Standard Headset

Use your headset for hands-free calling that won't disturb your coworker and gives you some privacy.
Procedure
Step 1 Plug in a headset.
Step 2
Enter a number using the keypad.
Step 3
Press Headset
Cisco IP Phone 7800 and 8800 Series Accessories Guide for Cisco Unified Communications Manager
44
.
.
.
Headsets