Feature Control Policy Default Values; Reset Options And Load Upgrades - Cisco DX650 Administration Manual

Feature Control Policy Default Values

Feature Control Policy Default Values
The following table shows the list of features that you can configure, and the default value.
Table 33: Feature Control Policy Default Values
Feature
Barge
Call Back
Conference List
Divert (Alerting)
Divert (Connected)
Forward All
Mobility
Park
Redial
Report Caller
Report Quality
Speed Dial
For more information, see the
Communications Manager Administration Guide.

Reset Options and Load Upgrades

Cisco Desktop Collaboration Experience receives configuration changes and load upgrades from Cisco Unified
Communications Manager. Cisco Desktop Collaboration Experience handles request changes by the following:
• Reset will wait for active call to end.
• If the device screen is on, user receives a popup dialog box that notifies the user about the changes and
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
148
Feature Control Policy Configuration
the need for restart. The dialog box provides the following options:
◦ Restart: Dismisses the popup dialog box and restarts the device (default action).
◦ Snooze: Dismisses the popup dialog box for an hour. The user can set the device to snooze for a
maximum of 24 hours, after which the device will restart.
Default value
Enabled
Enabled
Enabled
Disabled
Disabled
Enabled
Disabled
Disabled
Enabled
Disabled
Disabled
Enabled
chapter in the Cisco Unified