Security Configuration Menu - Cisco 7962G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Security Configuration Menu

The Security Configuration menu that you display from the Device Configuration menu displays settings
that relate to security for the phone.
Note The phone also has a Security Configuration menu that you access directly from the Settings menu. For
information about the security options on that menu, see the
page
Table 4-12
Table 4-12 Security Configuration Menu Options
Option Description
PC Port Disabled Indicates whether the access port on the
phone is enabled (Yes) or disabled
(No).
Must be set to enabled for video
support on the phone
GARP Enabled Indicates whether the phone learns
MAC addresses from Gratuitous
Address Resolution Protocol (ARP)
responses. Disabling the phone's
ability to accept Gratuitous ARP will
prevent applications that use this
mechanism to monitor and record voice
streams from working. If voice
monitoring is not desired, set this
option to No (disabled).
Voice VLAN Indicates whether the phone allows a
Enabled device attached to the access port to
access the Voice VLAN. Setting this
option to No (disabled) prevents the
attached PC from sending and
receiving data on the Voice VLAN.
This setting also prevents the PC from
receiving data sent and received by the
phone. Set this setting to Yes (enabled)
if an application that requires
monitoring of the phone's traffic is
running on the PC. These applications
include monitoring and recording
applications and network monitoring
software.
Web Access Indicates whether web access is
Enabled enabled (Yes) or disabled (No) for the
phone.
OL-12641-01
4-30.
describes the options on the Security Configuration menu.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0
"Security Configuration Menu" section on
To Change
From Cisco Unified Communications
Manager Administration, choose >
Device > Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose >
Device > Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose >
Device > Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose >
Device > Phone > Phone Configuration.
Device Configuration Menu
4-25